Don Alan Full Size Chop Cup | Aluminum | Polished Finish

29915
30 days
In stock

Description

Don Alan Full Size Chop Cup | Aluminum | Polished Finish

Don Alan Chop Cup

The Don Alan Full Size Chop Cup and RNT Red Balls.
The hallmark of our Jumbo Chop Cup selection: The Don Alan Full Size Chop Cup has a wide 3 3/8 inch mouth that swallows almost anything you can throw at it. Big enough for a baseball, the cup comfortably hold a lemon, an apple, an orange or any like-sized load of your choice. Tennis ball? No problem. In fact, if you produce a tennis ball out of this cup, you owe it to yourself to produce something even bigger! As chop cups go, the Don Alan Full Size Chop Cup gives you the largest load capacity of any commercially available cup.

The Don Alan Full Size cup design has no mouth bead, and no shoulder beads. It incorporates two dress lines around the deep-dish saddle and has a drastic radius in the rounded sidewall which amplifies the size of the final load ball, creating the illusion that the ball is actually bigger than the cup, when a maximum size load is produced and is rested on the cup's saddle. Of course, such a display is totally unnecessary after your audience has experienced the jumbo size loads that can fit into this cup.

The cup is so large that you shouldn't use any Chopped Balls that are smaller than 1 inch in diameter with it. Smaller balls just look disproportionate to the jumbo size of the cup. We recommend, and include 1 1/8 inch balls, but 1 3/8 inch balls will work just as well, if not better.

Craftsmanship

Each cup is hand spun from the original RNT2 Don Alan Full Size Chop Cup tooling from aluminum and polished to a flossy finish exterior with a brushed satin interior.

Includes

Don Alan Full Size Chop Cup | Aluminum | Polished Finish is made entirely in the USA.

Specifications

Material

Metal:
Finish:

Specifications

Height per ea:
3 1/2 inch
Inside Diameter:
3 3/8 inch
Inside Depth:
3 inch
Saddle Diameter:
2 1/2 inch
Dimple Depth:
3/16 inch
Weight per ea:
3.5 oz (100g)

Recommended Balls

All Purpose:
1 1/8 inch (28mm)
Load Ball:
3 inch (76mm)

Brand

Artist or Manufacturer:

Reviews

I searched long and hard for the “perfect chop cup routine” out there and James Swain’s routine (based on Larry Jenning’s routine) really spoke to me. The routine uses this wonderful (and large) chop cup to handle real baseballs as a final load. It didn’t hurt my decision at all that I already had a mini Don Alan chop cup in my magic collection (although I do a different routine with the mini). If you are looking for a “Full Size, Professional” chop cup, look no further than the Don Alan.

This is my favorite cup. It looks like silver.
Write a review

Good to know

Our Best Picks