Bestsellers

The Magnetic Wallet (The Butt Magnet) is a slim synthetic leather wallet for your hip pocket. It's a utility device that your audience never sees. It's constructed from a high-quality RED synthetic leather and only holds one very strong 2" round N45 neodymium disc magnet with a pull force of 29 lbs.

Each of our RNT Red Crochet Ball | 1 1/8 Inch (28mm) | Magnetic Balls is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball. The magnet in the ball is adjustable. Instructions and adjusting tool included.

Each of our RNT Red Crochet Ball | 1 Inch (25mm) | Magnetic Balls is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball. The magnet in the ball is adjustable. Instructions and adjusting tool included.

RNT Red Crochet Ball | 1 1/8 Inch (28mm) is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball.

RNT Red Crochet Ball | 1 Inch (25mm) is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball.

Each of our White Crochet Ball | 1 1/8 Inch (28mm) | Magnetic Balls is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball. The magnet in the ball is adjustable. Instructions and adjusting tool included.

Each of our RNT Red Crochet Ball | 3/4 Inch (19mm) | Magnetic Balls is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball. The magnet in the ball is adjustable. Instructions and adjusting tool included.

Under cover of the hands, four "heavy" brass weights sitting on a table magically jump from under one hand to under another, until they all assemble together. This reproduction of the classic Chink-a-Chink set is based on Dai Vernon's own set of Chink-a-Chink that he carried in his close-up case.

RNT Red Crochet Ball | 3/4 Inch (19mm) is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball.

White Crochet Ball | 1 1/8 Inch (28mm) is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball.

The Don Alan Mini Chop Cup is the practical walk-around chop cup that can be carried in the pocket. It is designed to hold a golf ball for a load and a 1 5/8" RNT Red Load Ball is included with each one.

Our RNT Red Crochet Ball | 1 5/8 Inch (41mm) Load Ball is slightly smaller than a golf ball. Constructed from 1 1/2 inch hardwood oak core balls and expertly crocheted by hand. Because of their smaller diameter they are excellent for palming in the hand as they will fit comfortably in finger palm.

The Ken Brooke Master Chop Cup is an authentic reproduction of the first chop cup created by Al Wheatley in the 1950's. Sometimes referred to as the Highball Cup, it was designed as a tall cup. The cup accommodates an impressive baseball size load. In many ways it strongly resembles the bottom half of a cocktail shaker.

Our RNT Red Crochet Ball | 2 3/8 Inch (60mm) is ideal for our medium size cups. They make stunning loads for cups that accommodate billiard ball size loads. Because of their size they are excellent for concealing in the hand in that split second it takes to load the cup.

The Don Alan Full Size Chop Cup and RNT Red Balls is the hallmark of our Jumbo Chop Cup selection: The Don Alan Full Size Chop Cup has a wide 3 3/8 inch mouth that swallows almost anything you can throw at it. Big enough for a baseball.

Each of our White Crochet Ball | 1 3/8 Inch (35mm) | Magnetic Balls is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball. The magnet in the ball is adjustable. Instructions and adjusting tool included.

RNT Red Crochet Ball | 7/8 Inch (22mm) is expertly crocheted by hand with the highest quality cotton/polyester thread over a hardwood oak core ball.

The Don Alan Mini Chop Cup is the practical walk-around chop cup that can be carried in the pocket. It is designed to hold a golf ball for a load and a 1 5/8" RNT Red Load Ball is included with each one.